A bit more Western Progress and a VEA wagon

There has been very little modelling over the last couple of weeks, partly due to a lack of time and a nasty bug did not help my motivation.  However, a couple of projects have crept forwards.  The first up is a VEA wagon which has finally been finished, which I think has taken over 3 years from building to finally adding the transfers.  This is the second of 3 VEA wagons for the layout that has been finished.  I only used microsol/set for the transfer application and I am really happy with the application.

Finished VEA van.

The Western has also seen a bit of further progress. I added the footsteps to the chassis before re-adding the body shell, and I must confess I found them baffling.  I had to substantially shorten them, to stop them fouling the bogies, which made them too wide for the body shell.  This means the body shell now sticks out too far on the chassis.  This requires the footsteps to be sanded down a little, before this locomotive is finally finished.  However, it is starting to shape up and just requires this modification to the footsteps and the wheels to be painted before this is finished.  I have also made a start on the new layout, with some of the track cut to size and the power bus installed.  However, everything is now on hold as I head to Greece for a couple of weeks with work.  I intend to source all the parts for the layout for when I return, so hopefully I can spend a weekend wiring the new layout up when I get back. 

The western with the body shell added.  Those wheels need toning down.

The reassembled Western.

A good rear end! A 20t brake van

Over the last couple of weeks I have been weathering a Hornby Brake Van.  Having finished this project off today I thought I would post a few images of the process of creating this wagon.  Now whilst I do not consider my modelling to be anywhere near perfect, I though it would be interesting to take photographs of the project over different stages of the process and see how they contribute to the final model.  A spanner was thrown into the works when I thought I had finished the wagon I gave it a blast of humbrol matt varnish and it immediately produced a very white finish over the paint work.  This required further coats of varnish and various weathering shades to tone it down, and hence the finish was slightly heavier than I was intending.  All of the painting was undertaken with an air brush and using railmatch enamel shades.  One slight regret is I did not fit a working tail lamp, but taking the wagon apart to fit the the 3 link couplings was such a headache with the hand rails that I cannot be bothered to open it up again.  I have a Bachmann version to do, and I intend to fit a tail lamp on this next one.  All in all I am pretty happy with this wagon and looking forward to it earning its keep on Charlton when this becomes operational.  

First up I added some splatters of white paint, to represent chipped paintwork.

I dipped a cotton bud in some white spirit and toned down the effect of the white paint, removing some of it.

A diluted wash of weathered black and frame dirt was hand brushed over the wagon.

Various shades of sleeper grime, frame dirt and weathered black were spayed over the brake van.

Some light rust was added to some of the metal components of the wagon, including the duckets.

The wagon was then treated to some further shades of frame dirt and sleeper grime to blend all the various components together.

Finished with several sealing coats of railmatch matt varnish.

A new micro-layout begins

This week a lovely parcel arrived from Tim Horn baseboards (http://www.timhorn.co.uk/) containing two sets of baseboards.  The first set of baseboards is for a small micro I intend to build between now and xmas.  Both boards are 3ft by 1ft and will be used to build a small station, which was originally a through station, but is now the terminus of a truncated branch in North Devon.  I intend to use up lots of odds and sods on this build, stuff that has been hanging around in modelling boxes for ages, but has never been used.  

The basic track plan for the new micro-layout.

The layout will have a small loop, and siding for a provender store.  I am currently missing one point to be able to get the track work down fixed down, but have pretty much everything else I need, bar a few connectors for the power bus.  One issue with the small size of the baseboards is that the station will have to be built over the baseboard join, something I was keen to avoid. I will just cross that bridge when I get to it.

Provender store and goods wagon.

The provender store is resin model from Bachmann, something I had forgotten I owned.  I figure this will be used to unload fertiliser from 12t vans, something that used to happen at Barnstaple.  Other traffic will be china clay and also milk (ala Meeth/Torrington).  Pictured in front of this is a goods wagon I finished off this week, with some detailing and a coupling change, to 3 link couplings.  A quick and satisfying bit of modelling.  The heljan western is also making some progress, and maybe, just maybe I will finish that model off this week....

It is now a bit more noisy on the western front....Heljan Class 52 upddate

Several months ago I posted an update on the detailing of my class 52 Heljan Western.  The body shell and chassis had been largely painted and weathered, and I was waiting for a replacement set of Ultrascale wheel sets to arrive.  The project stalled at this point and has been sat in a box since.  However, with the delivery of the Ultrascale wheels, the project has seen some progress this week.

All the component parts ready to be put back together.

Fitting in the new wheels was a piece of cake and this has improved the running characteristics of the locomotive no end. The cabs and cab glazing have been re-attached to the body and handrails to the front of the cab.  When reassembling the locomotive I found out that I had misplaced the body side glazing pieces.  This was really annoying and try as I might I could not re-locate them.  However, this could be an advantage, as I now plan to make some replacement glazing and model the body side windows open.

Sound decoder and speaker in place.

The advantage of some open windows is because I have fitted a Howes ESU sound decoder to the locomotive.  Having some of windows open will allow the sound to escape the body shell.  I used a relatively small speaker which I glued to a piece of plasticard which has been glued to the body shell.  I have yet to check it all fits back together ok, but the plasticard has only been lightly glued into place, so there is some wiggle room here.  The smaller speaker reproduces the sound pretty well, but it is not too loud, which I think is a nice balance.  The Howes sound recordings are excellent and fitting the sound decoder was a simple job.  The only slightly tricky bit is fitting a new speaker, as the speaker the decoder is supplied with requires cutting off and being replaced with a new one.

Sounding good!

So now into the final jobs on the locomotive.  Colour the wheels, add the windscreen wipers, replace the glazing, put it all back together then blend the two halves back together with a final bit of weathering.  Hopefully one to be finished this week......

13t wagon for the engineers department

Some good progress has been made this week on the modelling front, with a few wagons being finished off in the paint shop.  These wagons have been built for some time (I think in 2014) and have been lying around in a box unpainted - it is funny how quickly time flies by!  So this week I made a concerted effort to finish at least some of them.  So first up is one of a pair of 13t open wagons with corrugated ends, built from the Parkside kit.  Normal metal buffers and 3 link couplings have been added, with transfers from modelmaster.  This one has been finished in engineers olive and has been seconded to the engineers department.

On the layout front with Pottington Quay still in storage the new baseboards have been ordered and are due to arrive this Wednesday.  So exciting times ahead this week for starting a new layout.