Saturday, 26 February 2011

47035 and a walrus


Hopefully a better finish now on 47035

Last night I managed to finish off weathering the detailing a class 47 and the second cambrian walrus wagon. The walrus wagon has been kicking about for ages part finished and it was great to finally finish it off. The blue class 47 was an older project that I weathered by hand painting and weathering powders. At the time I was happy with it, but i think my ability to weather models has progressed and with some time to reflect I decided it was time for a second attempt.


Front end of 47035

The roof was coloured with weathered black and a series of washes of sleeper grime, matt black and frame dirt sprayed over the body. I have a photo of 47035 working in south Devon, looking pretty similar to this. I am now much happy with the end product and am not going to do any more on this loco!!.....


The finished walrus wagon

The walrus is the cambrian kit. This was weathered with rust, frame dirt and sleeper grime after the transfers were added, then sealed with aclad varnish. I am much happier with this finish than the first walrus. I still think I am going to have to make just one more of these wagons though!! A great kit and thoroughly recommended.


The end of the walrus wagon

Today I am wiring up my second fiddle yard and hope to finish the build on a CCT wagon. I am going to start a series of whale wagons and then just spend sometime running some trains on Amberleigh. I have decided to wait a few months before starting Watergate Halt. I am going to have a think about exactly about what I want from the layout and start constructing some buildings for the layout, before really getting stuck into the project.



Monday, 21 February 2011

Engineers grey class 33/1


Class 33/1 in engineers grey trundles past Amberleigh halt

Last week I was working close to home in Cornwall and with half term this week, modelling has been confined to snatches of time in between doing other things. I have managed to finish weathering my class 33/1 in engineers grey. This is a heljan bargain from hattons. The weathering is really quite light, with a mixture of life colour acrylic sleeper grime, frame dirt, roof dirt and matt black. I think it works quite well but is relatively subtle.

The windows were masked with maskol, but with taking off the maskol I ripped off a windscreen wiper. I have had to nick one from a class 33/2, and now need some spares. This aside, this has been a lovely little project and I am pretty happy with the result. This locomotive is in a livery right at the end of the time period I model (with no roof pods though), in early 1991. It is one of a number of class 33's and and 31's I hope to run on the this layout and watergate halt, when it gets constructed. These were the mainstay of locomotive hauled trains on the tarka line in the 1980s, with the odd class 50, 47 and 37 thrown in for good measure.


It is hauling a short engineers train. Note the missing windscreen wiper, damaged during removing the maskol!!

On other tasks I have still nearly finished the walrus wagon and a class 47 is nearing completion. I have attached the second fiddle yard to Amberleigh and it now nearly functions as a though running station, except the wiring up of one of the fiddle yard points seems to be wrong!! I am going to get this sorted out this week in the evenings and then have a weekend doing some proper modelling. Looking forward to finishing off some projects and starting the build of a SR CCT in br blue and Whale wagon, two kits that have been sat waiting since xmas!!


Hopefully the light weathering job can be seen to good effect in this shot

Saturday, 12 February 2011

MEA mk1 and a grampus finished

Today I planned to add the second fiddle yard to Amberleigh and also a finish a a number of projects that have been waiting around for a while. Well everything takes twice as long as you think it is going to. I did not get the second fiddle yard even started today, but I did manage to finish a grampus wagon and the weathering of a mk1 NEW full break in intercity livery.



With the mk1 I took the carriage apart, including removing the windows, and gave the underframe a wash of frame dirt. I painted a dilute black wash over the door frames of the coach and wiped off any excess with a paper towel. I then put the coach back together, except for the windows and did some weathering of the coach underframe with frame dirt, roof dirt and weathered black from an air brush. The result is a pretty grubbed up mk1!!! The grampus is just a simple parkside kit, weathered with acrylic life colour paints and finished with modelmaster decals. On both these models I used the new johnsons klear varnish, available from Relish Models. The results are very pleasing and it is extremely easy to use, not requiring any thinning before spraying.



I made a little progress on the class 33/1 today, giving the underframe a first spray and finishing the detailing of the buffer beams. I need to add a little bit of colour to the buffer beam pipes, and then hopefully I can finish this off in the next few days. I have also put the decals on the walrus wagon. I need to add some handwheels to the walrus, then this should also be finished this week. Hopefully I will get another update of some more finished projects in a few days.

Sunday, 6 February 2011

bits and pieces


More trees added to hide the terrible break in backscene!!

Another week flies by. This has been a very slow week of modelling, but a fantastic family get together this weekend is a good excuse! Most progress was made on the heljan class 33/1, with the buffer beams removed and detailed it is nearly ready for spraying. I also have the time to finish the walrus and grampus in the next few days and have the 33/1 and a blue 03 lined up for the weekend. With my girlfriend away/working all weekend I am hoping it will be a mighty productive week of modelling!!!

I also did some general tidying up of Amberleigh the weekend before last. I gave the tunnel portals a wash of sleeper grime and added some conifer trees in front of the horrendous joins in backscene. I also finally got round to painting the steps black. It is true about rushing things. All the little niggly bits of this scenic test track are the bits rushed or things done when really I was probably just a little too tired.

Another task I have to accomplish is the fitting of the second fiddle yard to Amberleigh. To finish this I have to buy a second telescopic trestle. I decided on buying these from screw fix. At £25 they provide a trestle that will last a lifetime, are sturdy and just the job for someone like me, i.e. limited woodworking skills, limited time and small interchangeable layouts.

With a lot of computer work going on this weekend I read several online internet forums on what people think we need in rtr form from the big manufacturers, i.e. hornby and bachmann. I found in interesting the difference of opinion and also the debate on what we should pay, what is realistic, etc. My own opinion is that prices are only going to go up (which personally I do not mind, if this addresses environmental and workers rights issues in other countries) and I am modest about what I need/can afford.

But if I could have my own wishlist, it would be very simple. How about a class 121, class 120, class 101 and class 119 up to modern standards. I know DMU biased, but it is such a glaring gap in the market and the 108 and 105 are so good, surely it lets the manufacturers know there is a market out there which will buy these products. I know I am biased, in dmu/diesels and the southwest, but that is what I would like to see. Bachmann please take notice!!!!

Lastly, I fixed my air brush last week, after a quick call to the airbrush company for advice and I am mighty relieved. I should also add that the advice/time taken to discuss the problem by the air brush company was second to none and I would heartily recommend them to anyone thinking of/buying an air brush. A small offending blob of paint has not been removed and spraying is resumed!!!


A more general view of the nearly finished Amberleigh Halt

Sunday, 30 January 2011

Amberleigh at Night with a 108 DMU


The evening DMU service runs into Amberleigh.

It has been a week or so since my last post. Things have been busy, not least starting my own business this week. This has meant that there has been little time for actual modelling, until this weekend. This said, I still managed to purchase a Hornby Class 50 in NSE and also a BR blue class 03, coupled with two Mk2 TSOs. I guess I needed a good luck present for the new company!!

Another purchase this week were two telescopic trestles, to place the Amberleigh scenic board on. I finished the soldering on the scenic board this weekend, and attached one of the two fiddle yards. So far, so good. It all works!!! I waited until evening to see how effective the little station light and buffer stop are. I hope the photographs do it justice. I think it looks fantastic and am really happy with the result. I ran in my class 108 in NSE with its lights on and took a couple of snaps. The station light is from the detail matters range. It has created just the effect I was after, of an isolated unstaffed halt in rural Devon, waiting for an infrequent DMU service to the big smoke (Barnstaple or Torrington!!!!!)


Waiting for the late train back to Barnstaple

Tonight I am going to add a couple of trees to the layout, add a bush or two to a scorch mark on the grass caused by the soldering iron, and paint the tunnel and steps. Just one more fiddle yard to add, then all done. A scenic test track all finished, and after a few weeks rest, I will start the larger sister layout of Watergate Halt.

Other projects remain seriously slow at the moment. The walrus and grampus are gloss varnished, ready for transfers. The class 33/1 is apart, as is the mk1 NEA, but there has been no progress at all on any of these projects. I also want to do some further weathering of my class 47,035. Hopefully, over the next two weeks I will get up plenty of posts of progress on these projects soon!


The class 108 pulls up the halt. It is a NSE 108 livery, it is not uncommon to see this livery this far west

Thursday, 20 January 2011

Engineering wagons at Amberleigh


BDA wagon with rail load

After a great weekends modelling, I have done very little this week so far. However, I did find time to put together all the components of the BDA wagon I had, to model a wagon with a rail load. This was certainly inspired by George Dent's article in model rail, but my load uses painted rail instead of steel girders. Also I used some low task masking tape for my straps. However, I think it is a great way to produce a realistic looking wagon with relatively little work - thanks model rail for some good inspiration here!!

Inspired by how pleased I was with this wagon, I decided to put some other of my engineering wagons on Amberleigh, together with my class 37/0. This incidentally I have regrettably put on flea bay to raise some much needed funds. However, with some empty ballast wagons and some rail carrying wagons, I think Amberleigh looks great, modelling some engineering works in the late 1980s'. Below are a selection of photographs from this, enjoy, they are only a bit of fun!!!


There has been considerable engineering work on the Torrington line this week. At Amberleigh halt a class 37/0 with a short empty ballast train passes a stationary BDA and salmon YNA with crane


Shark wagon at the end of the engineers train


37035 halls its train of catfish and dogfish wagon past the small siding at Amberleigh


The train contained both old battered and relatively new dogfish wagons

Sunday, 16 January 2011

Bachmann class 37/0 weathered!! (plus a dogfish and sealion)


Dutch livery class 37/0 shunts some engineering wagons at Amberleigh halt

Well a great weekends modelling has transpired. In fact I would go so far to say that I am modelled out!!! This weekend concentrated on weathering a class 37/0 in dutch livery, giving it a really heavy weathered finish. This is only my second attempt at modelling a weathered locomotive with my new air brush. It was a good lesson, as with funds being a little tight, I was planning to sell it on e-bay ready to raise some much needed cash!!! However, I am very pleased with the results and am now considering keeping it.


The passengers waiting for the local dmu service to barnstaple get a close up of 37035

I have somehow messed up my airbrush this weekend, it is spraying slightly to the side. I am gutted, but have no idea how it happened. I guess the centre needle must be broken, but how this happened I am not sure. Anyway,I weathered the locomotive with a combination of frame dirt, matt black, weathered black, roof dirt and sleeper grime all from the lifecolour range. Two coats of humbrol matt enamel varnish were added to seal it. The model is depicted in a heavily weathered state, but I really like the overall effect. I especially like the very flat matt finishes of the lifecolour acrylic paints, I think they look most realistic.


A slightly battered sealion wagon in the short engineers train

Other than that a sealion and dogifsh have been added to the engineering stock. Again two very pleasing results with the airbrush weathering. The dogfish is an heljan wagon and the sealion is a bachmann wagon. Both have turned out nicely i think. I especially like the rust effect on the sealion wagon.


Close up of the weathering on the sealion wagon

On other projects I have a NEA Mk1 brake waiting for a good weathering and a grampus and walrus ready for the addition of some transfers. I also need to buy some trestles to finish the amberleigh halt scenic board. I have a feeling that the sale of the class 37/0 on ebay might end up funding the acquisition of these new trestles.....we shall see!!


A dogfish wagon also in dutch livery at Amberleigh


The unkept state of a departmental class 37 in the late 1980s